Custom Milling - We can do it for You!
We
can custom mill your lumber into flooring, paneling, moulding, S4S, etc!
Truck load quantities are okay, and we can do small loads as well.
Call to discuss your milling needs and requirements. We will most likely need to see some of the material before giving an exact quote.
We also partner with local mills in the area if you need a "logs to lumber" job for using local wood in your home. You specify what specie you are wanting to use in your project and we will source it for you if we do not have it already on the yard.
Our pricing for the different operations are as follows:
| Milling Operation | Price Per | Price | |
| Drying Lumber* | board foot | .25 - .35 | |
| Straight Line Rip | linear foot/side | .10 | |
| Double Side Planing | linear foot | .30 | |
| 4 side moulding* | linear foot | .30 - .60 | |
| Denailing | hour | $15 | |
| Custom Sawing Valuable Lumber (curly) | hour | $90 | |
| Resawing Flooring Blanks | board foot | .35 | |
| Loading | hour | $35 | |
| Delivery | mile | $1.00 | |
| Stacking for drying | board foot | .10 | |
*Depends
on Specie and condition of material |
|||
On some patterns special tooling may be required, such as when matching an existing moulding you provide, and a setup fee and tooling fee may apply. This will depend on the cost of the tooling and complexity of setup.
Some
projects will require very detailed dimensions and notes about the area
the piece will be installed. For instance the transition shown in the
photograph was developed for a specific area where two different floors
come together.
This Antique Heart Pine Transition was made out of the same material that the flooring was made out of.
This type of custom milling can be the "icing" on the cake of a home that is unique in many areas, especially the custom milled pieces from CGI.
Custom
milling can be anything from planing beams, log home logs, making paneling
from your wood, cutting board and batten lumber out of the specie of your
choice, sizing your rough lumber, cutting your logs and stacking and drying
the wood, cutting flooring blanks, making a special mantle the size your
require, edging your lumber, and much more. Don't let your imagination
stop you. Call or come by to see if our special milling crew can handle
what you have in mind. Most likely, the answer will be yes!
If
you have lumber ready for planing and want us to come on site and mould
it, we can do that. Call CGI for details about this unique ability we
have. Our custom trailor features a Logosol
4-Head Planer/Moulder, a 25KW generator, blower, and a Logosol SH230
moulder/edger.
We can take a stack of sized lumber and turn it into flooring, paneling, S4S, and more. Call to discuss this service to see if it will be best for your situation.
